axk(3/4)s narrow-pitch connectors for board-to-board connection narrow pitch (0.6mm) connectors p6 series ?p6s so cket header features 1. bellows-type contacts bellows-type contacts resist mating stress and offer high contact reliability. 2. porosity treatment applied for improved resistance against corrosion. 3. mating length 1.1mm the effective mating length has been extended to ensure that there is some latitude in the mating. 4. automatic mounting 1) suction area for suction-type automatic mounting machines is employed. 2) embossed tape packaging is standard. 3) terminal construction which is virtually resistant to solder bridging. applications 1. compact portable devices ?ellular phones, dvc, digital cameras, etc 2. this is ideal in applications involving information devices such as notebook computers, where connections are required between a backplane and a cpu board or another type of multi-wiring expansion board. compliance with rohs directive type effective mating length p6s 1.1mm round corner makes contact. the bellows type contacts are fabricated by bending thin sheet metal. they offer reliable contact since a rounded corner, instead of a sharp edge, is used for tuning fork type contact. effective mating length a longer effective mating length means that normal electrical connection can be maintained even if the connectors are not perfectly coupled. headersocket suction face expansion board requiring multi-wiring, such as cpu board. motherboard http://ww w .m e w .c o .jp/ac/e/ matsushita electric w orks, ltd.
narrow-pitch connectors axk(3/4)s table of product types ordering information socket header 4.0mm mated height 20 30 40 50 60 80 100 ? ? ? ? ? ? ? ? ? ? ? ? ? ? 5.0mm 6.0mm ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 7.0mm 8.0mm 9.0mm notes: 1. special orders are possible for contact numbers not listed in the table above. (please consult us in such a case.) 2. the standard type comes with positioning bosses. connectors without positioning boss are available for on-demand production. number of contacts mated height 0: for mated height 4.0 mm, 5.0 mm and 6.0 mm 3: for mated height 7.0 mm, 8.0 mm and 9.0 mm 4: for mated height 4.0 mm and 7.0 mm 5: for mated height 5.0 mm and 8.0 mm 6: for mated height 6.0 mm and 9.0 mm surface treatment (contact portion / terminal portion) 5: ni plating on base, au plating on surface / ni plating on base, au plating on surface packing g: socket for mated height 4.0, 5.0, 6.0 mm and header for mated height 4.0, 7.0 mm: 1,500 pieces embossed tape and plastic reel 2 socket for mated height 7.0, 8.0, 9.0 mm and header for mated height 5.0, 6.0, 8.0, 9.0 mm: 1,000 pieces embossed tape and plastic reel 2 number of contacts (2 digits) 3s: narrow pitch connector p6s (0.6 mm pitch) socket 4s: narrow pitch connector p6s (0.6 mm pitch) header functions 3: with positioning bosses 4: without positioning bosses axk g5 http://ww w .m e w .c o .jp/ac/e/ matsushita electric w orks, ltd.
axk(3/4)s product types notes) 1. regarding ordering units: during production: please make orders in 1 reel units. samples for mounting con?mation: available in units of 50 pieces. please consult us. (see ?egarding sample orders to con?m proper mounting on page 19.) samples: small lot orders are possible. 2. the standard type comes without positioning bosses. connectors with positioning bosses are available for on-demand production. for this type of connector, 9th digit of the part no. changes from 3 to 4 e.g. mated height 4.0 mm, 20 contacts for sockets: axk3s2004 5g. mated height no. of contacts part no. pac king so cket header inner carton (1 reel) outer carton 4.0 mm 20 axk3s20035g axk4s20435g 1,500 pieces 3,000 pieces 30 axk3s30035g axk4s30435g 40 axk3s40035g axk4s40435g 50 axk3s50035g axk4s50435g 60 axk3s60035g axk4s60435g 80 axk3s80035g axk4s80435g 100 axk3s00035g axk4s00435g 5.0 mm 20 axk3s20035g axk4s20535g socket: 1,500 pieces header: 1,000 pieces socket: 3,000 pieces header: 2,000 pieces 30 axk3s30035g axk4s30535g 40 axk3s40035g axk4s40535g 50 axk3s50035g axk4s50535g 60 axk3s60035g axk4s60535g 80 axk3s80035g AXK4S80535G 100 axk3s00035g axk4s00535g 6.0 mm 20 axk3s20035g axk4s20635g 30 axk3s30035g axk4s30635g 40 axk3s40035g axk4s40635g 50 axk3s50035g axk4s50635g 60 axk3s60035g axk4s60635g 80 axk3s80035g axk4s80635g 100 axk3s00035g axk4s00635g 7.0 mm 20 axk3s20335g axk4s20435g socket: 1,000 pieces header: 1,500 pieces socket: 2,000 pieces header: 3,000 pieces 30 axk3s30335g axk4s30435g 40 axk3s40335g axk4s40435g 50 axk3s50335g axk4s50435g 60 axk3s60335g axk4s60435g 80 axk3s80335g axk4s80435g 100 axk3s00335g axk4s00435g 8.0 mm 20 axk3s20335g axk4s20535g 1,000 pieces 2,000 pieces 30 axk3s30335g axk4s30535g 40 axk3s40335g axk4s40535g 50 axk3s50335g axk4s50535g 60 axk3s60335g axk4s60535g 80 axk3s80335g AXK4S80535G 100 axk3s00335g axk4s00535g 9.0 mm 20 axk3s20335g axk4s20635g 30 axk3s30335g axk4s30635g 40 axk3s40335g axk4s40635g 50 axk3s50335g axk4s50635g 60 axk3s60335g axk4s60635g 80 axk3s80335g axk4s80635g 100 axk3s00335g axk4s00635g http://ww w .m e w .c o .jp/ac/e/ matsushita electric w orks, ltd.
narrow-pitch connectors axk(3/4)s specifications 1. characteristics 2. material and surface treatment dimensions (unit: mm) item speci?ations conditions mated height: 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm electrical characteristics rated current 0.5a/terminal (max. 16 a) rated voltage 60v ac/dc breakdown voltage 150v ac for 1 min. detection current: 1ma insulation resistance min. 1,000m ? using 500v dc megger contact resistance max. 80m ? based on the contact resistance measurement method speci?d by jis c 5402. mechanical characteristics composite insertion force max. 0.785n {80gf} no. of contacts (initial) composite removal force min. 0.0588n {6gf} no. of contacts post holding force min. 0.98n {100gf} measures the maximum load in the post axial direction until removal environmental characteristics ambient temperature ?5 c to +85 c no freezing at low temperatures soldering heat resistance max. peak temperature of 245 c (on the surface of the pc board around the connector terminals) infrared re?w soldering 300 c within 5 sec. soldering iron thermal shock resistance (header and socket mated) 5 cycles, insulation resistance min. 100m ? , contact resistance max. 80m ? sequence 1. ?5 c, 30 minutes 2. ~ , max. 5 minutes 3. 85 c, 30 minutes 4. ~ , max. 5 minutes humidity resistance (header and socket mated) 120 hours, insulation resistance min. 100m ? , contact resistance max. 80m ? bath temperature 40 2 c, humidity 90 to 95% r.h. saltwater spray resistance (header and socket mated) 24 hours, insulation resistance min. 100m ? , contact resistance max. 80m ? bath temperature 35 2 c, saltwater concentration 5 1% h 2 s resistance (header and socket mated) 48 hours, contact resistance max. 80m ? bath temperature 40 2 c, gas concentration 3 1 ppm, humidity 75 to 80% r.h. lifetime characteristics insertion and removal life 50 times repeated insertion and removal speed of max. 200 times/hours unit weight p6s mated height: 4mm 50 contacts; socket: 0.29g header: 0.26g pa rt name mated height: 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm material surface treatment molded portion heat-resistant resin (ul94v-0) contact/post copper alloy contact portion: ni plating on base, au plating on surface te r minal portion: ni plating on base, au plating on surface (except for thick of terminal) 0 ? +3 0 the cad data of the products with a cad data mark can be downloaded from: http://www.mew.co.jp/ac/e ?mated height: 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm ?socket general tolerance: 0.2 a b 0.10 0.60 0.05 0.20 0.03 0.60 0.05 1.82 4.6 0.65 0.05 dia. c 0.10 0.4 d 0.10 5.8 (1.3) 3.2 (1.3) 0.15 0.03 1.60 0.08 c 0.9 dimension table (mm) no. of contact a b c 20 9.1 5.40 8.00 30 12.1 8.40 11.00 40 15.1 11.40 14.00 50 18.1 14.40 17.00 60 21.1 17.40 20.00 80 27.1 23.40 26.00 100 33.1 29.40 32.00 recommended pc board pattern (top view) b 0.05 0.60 0.05 0.30 0.05 0.60 0.05 2.40 0.05 1.60 0.05 c 0.05 6.80 0.05 2-0.8 dia. hole +0.1 0 mated height d 4.0mm, 5.0mm, 6.0mm 3.05 7.0mm, 8.0mm, 9.0mm 6.05 the speci?ations and appearance of this product are subject to change for improvement. please contact us for details. cad data http://ww w .m e w .c o .jp/ac/e/ matsushita electric w orks, ltd.
axk(3/4)s socket and header are mated embossed tape dimensions (unit: mm, common for respective contact type, socket and header) the speci?ations and appearance of this product are subject to change for improvement. please contact us for details. ?header general tolerance: 0.2 a e d b 0.10 0.60 0.050.60 0.05 0.20 0.03 1.72 4.2 0.4 0.65 0.05 dia. c 0.10 0.10 1.40 0.08 2.8 5.4 (1.3) (1.3) 0.20 0.03 c 0.9 dimension table (mm) no. of contact a b c 20 9.1 5.40 8.00 30 12.1 8.40 11.00 40 15.1 11.40 14.00 50 18.1 14.40 17.00 60 21.1 17.40 20.00 80 27.1 23.40 26.00 100 33.1 29.40 32.00 recommended pc board pattern (top view) b 0.05 0.60 0.05 0.60 0.05 0.30 0.05 c 0.05 1.40 0.05 2.00 0.05 6.40 0.05 2-0.8 dia. hole +0.1 0 mated height d e 4.0mm, 7.0mm 0.95 3.3 5.0mm, 8.0mm 1.95 4.3 6.0mm, 9.0mm 2.95 5.3 cad data h +0.2 -0.1 mated height h 4.0mm 4 5.0mm 5 6.0mm 6 7.0mm 7 8.0mm 8 9.0mm 9 ?tape dimensions (conforming to jis c 0806-1990. however, some tapes have mounting hole pitches that do not comply with the standard.) tape i tape ii 1.75 c d a 0.3 4 2 1.5 dia. +0.1 0 pull out direction 1.75 c d a 0.3 4 2 pull out direction b 1.5 dia. +0.1 0 ?plastic reel dimensions (conforming to eiaj et?200b) f e 1 top cover tape taping reel embossed carrier tape embossed mounting-hole http://ww w .m e w .c o .jp/ac/e/ matsushita electric w orks, ltd.
narrow-pitch connectors axk(3/4)s dimension table (mm) suf?: g (embossed tape package) connector orientation with respect to direction of progress of embossed tape notes mated height no. of contacts type of taping a b c d e f quantity per reel socket: 4.0mm, 5.0mm, 6.0mm 20 to 40 tape i 24.0 11.5 12.0 25.4 1 380 dia. 1,500 50 to 60 tape ii 32.0 28.4 14.2 12.0 33.4 1 80 tape ii 44.0 40.4 20.2 12.0 45.4 1 100 tape ii 56.0 52.4 26.2 12.0 57.4 1 socket: 7.0mm, 8.0mm, 9.0mm 20 to 40 tape i 24.0 11.5 12.0 25.4 1 380 dia. 1,000 50 to 60 tape ii 32.0 28.4 14.2 12.0 33.4 1 80 tape ii 44.0 40.4 20.2 12.0 45.4 1 100 tape ii 56.0 52.4 26.2 12.0 57.4 1 header: 4.0mm, 7.0mm 20 to 40 tape i 24.0 11.5 12.0 25.4 1 380 dia. 1,500 50 tape ii 32.0 28.4 14.2 12.0 33.4 1 60 to 80 tape ii 44.0 40.4 20.2 12.0 45.4 1 100 tape ii 56.0 52.4 26.2 12.0 57.4 1 header: 5.0mm, 6.0mm, 8.0mm, 9.0mm 20 to 40 tape i 24.0 11.5 12.0 25.4 1 380 dia. 1,000 50 to 60 tape ii 32.0 28.4 14.2 12.0 33.4 1 80 tape ii 44.0 40.4 20.2 12.0 45.4 1 100 tape ii 56.0 52.4 26.2 12.0 57.4 1 the speci?ations and appearance of this product are subject to change for improvement. please contact us for details. type direction of tape progress common for p6s socket header this corner is oriented on the c side. this corner is oriented on the c side. 1. prevention of reverse mating excessive mating force may damage the key , so be sure to match chamfered corners when mating. chamfered corner chamfered corner chamfered corner chamfered corner outline (top view) chamfered corner mating state http://ww w .m e w .c o .jp/ac/e/ matsushita electric w orks, ltd. for other details, please verify with the product speci?ation sheets.
|
